(110 x 165 x 3) mm  

Galvanized steel wire Increases the service life of the glass pane and provides antireflection also

(101 x 155 x 2) mm

made of galvanized and lacquered steel wire extends the service life of the external visor and ensures anti-reflective vision

(343 x 130 x 0,24) mm 5 pieces per pack

prefilter-PLUS (V)

submicrofilter-PLUS (S)

active charcoal filter-PLUS (A)

distributor piece for connection of a further user or device with safety couplings and -nipple

air heating system does not require electrical connection heating energy is generated by ingenious whirl technology compressed air can be warmed up until a temperature delta up to 20°C (e.g. compressed air -4°C breathable air +16°C) is carried directly on the waist belt blindingly easy assembling due to simple coupling

durable hood made of heavy duty canvas front part coated fabric  with washable and replaceable integrated collar with continuous adjustable, padded head harness with rectangular window glass visor and inner visor (anti-fogging) with incorporated half mask Polimask ALFA and particle filter DIRIN 230 P3R D extremely hard-wearing and high wearing comfort

fully complies with DIN EN 14593 and DIN EN 14594complete with safety coupling and nippleblack, non-porous, smooth EPDM inner layertemperature resistance from -30°C to +120°COperating pressure up to 10 bar / 145 psipressure carrier: synthetic yarnsblack EPDM outer layer, abrasion-, ozone- and ageing-resistantLABS-, release agent- and grease-freewith antistatic propertieselectrically conductive, R >10³ Ω/<10⁸ Ω

comfortable and durable overall made of leather and cotton the shotblasting overall provides reliable protection against coarse and fine dust as well as mechanical impact while shotblasting the front is made of top quality abrasion-resistant leather  with 2 ways front zip and covered zip the back side is made of heavy duty and breathable cotton fabric 2 patch hip pockets with flaps with attached stylish band collar stepless adjustable arm and leg cuffs extra wide leg cuffs for easy pulling

durable hood made of heavy duty canvas front part coated fabric  with washable and replaceable integrated collar with continuous adjustable, padded head harness with rectangular window glass visor and inner visor (anti-fogging) with incorporated half mask Polimask ALFA and combined filter DIRIN 230 A2-P3R D compact extremely hard-wearing and high wearing comfort

(DIN EN 14594 plus DIN EN 397 -20°C - +50°C apron 6.6 and 6.7 (Reflection loss requirements and penetration requirements)) durable fibre glass polyester helmet with glass visor  exchangeable inner anti-fogging visor with rubber frame  wire mesh screen  very stable window case with adjustable fastener integrated manometer ensures additional safety  the rubber helmet cover ensures for noise reduction and wear reduction  protective cape made of long-live coated fabric  adjustable waist belt  air flow regulator and safety nipple for compressed air hose connection 

1-level combined filter (including installed active charcoal filter with additional protection  against particles to 0,01µm ) for compressed air systems or compressors in good operating  status extremely robust housing including wall mounting therefore suitable for fixed mounting also with mechanical condensate-outlet 3/8“ compressed air connection (inlet and outlet) simply and quickly replaceable filter element

(DIN EN 14594 plus DIN EN 397 -20°C - +50°C apron 6.6 and 6.7 (Reflection loss requirements and penetration requirements)) durable fibre glass polyester helmet with plastic inner visor and external visor exchangeable inner visor with profile sealing ring  wire mesh screen  curved visor with wide angle viewing field and adjustable fastener integrated manometer ensures additional safety  the rubber helmet cover ensures for noise reduction and wear reduction  protective cape made of long-live coated fabric  adjustable waist belt  air flow regulator and safety-nipple for compressed air hose connection 

(DIN EN 14594 plus DIN EN 397 -20°C - +50°C apron 6.6 and 6.7 (Reflection loss requirements and penetration requirements)) durable fibre glass polyester helmet with glass visor  exchangeable inner anti-fogging visor with rubber frame  wire mesh screen  very stable window case with adjustable fastener integrated manometer ensures additional safety  the rubber helmet cover ensures for noise reduction and wear reduction protective cape made of leather adjustable waist belt  air flow regulator and safety-nipple for compressed air hose connection 

(DIN EN 14594 plus DIN EN 397 -20°C - +50°C apron 6.6 and 6.7 (Reflection loss requirements and penetration requirements)) durable fibre glass polyester helmet with plastic inner visor and external visor exchangeable inner visor with profile sealing ring  wire mesh screen  curved visor with wide angle viewing field and adjustable fastener integrated manometer ensures additional safety  the rubber helmet cover ensures for noise reduction and wear reduction protective cape made of leather adjustable waist belt  air flow regulator and safety-nipple for compressed air hose connection

(DIN EN 14594 plus DIN EN 397 -20°C - +50°C apron 6.6 and 6.7 (Reflection loss requirements and penetration requirements)) durable fibre glass polyester helmet with glass visor  exchangeable inner anti-fogging visor with rubber frame  wire mesh screen  very stable window case with adjustable fastener integrated manometer ensures additional safety the rubber helmet cover ensures for noise reduction and wear reduction protective cape made of leather with sleeves adjustable waist belt  air flow regulator and safety-nipple for compressed air hose connection 

(DIN EN 14594 plus DIN EN 397 -20°C - +50°C apron 6.6 and 6.7 (Reflection loss requirements and penetration requirements)) durable fibre glass polyester helmet with plastic inner visor and external visor exchangeable inner visor with profile sealing ring  wire mesh screen  curved visor with wide angle viewing field and adjustable fastener integrated manometer ensures additional safety  the rubber helmet cover ensures for noise reduction and wear reduction  protective cape made of leather with sleeves  adjustable waist belt  air flow regulator and safety-nipple for compressed air hose connection

2-level combined filter (with submicro- and active charcoal filter) for precleaned air from  factory compressed air plant or compressors in good working order with regular maintenance with automatic condensate-outlet and integrated pressure gauge equipped with high-quality pressure reducer or respective regulator, for necessary operating  pressure of the respiratory protective device for up to 2 users ideal for wall mounting also

3-level combined filter (with pre-, submicro- and active charcoal filter) for compressed air on assembly points or from compressors whose working order is not permanently monitored and  which are not regularly maintained with automatic condensate-outlet and integrated pressure gauge equipped with high-quality pressure reducer or respective regulator, for necessary operating  pressure of the respiratory protective device ideal for wall mounting also for up to 2 users or accessory

3-level combined filter (with pre-, submicro- and active charcoal filter) for compressed air on assembly points or from compressors whose working order is not permanently monitored and which are not regularly maintained  with automatic condensate-outlet and integrated pressure gauge  equipped with high-quality pressure reducer or respective regulator, for necessary operating pressure of the respiratory protective device  for up to 2 users or accessory installed in extremely robust aluminium housing protects the compressed air filter and its connections against shock and impact with carrying handle for transport ideal for part-residential use